Tel: +44(0)1590 673312 E-Mail: enquiries@berthon.co.uk

Work on RIPPLE moves forward

September 9, 2013

‘The frames are made using laminates of iroko machined to a thickness of 5mm. These are then covered with resorcinol glue on all mating faces and bent around a laminating jig; as pictured in the blog. This is then left for the glue to cure. Once the glue has completely hardened the frame is then removed and machined to the required thickness. The frame will later be tapered and bevelled on its outside face to allow it to correctly fit the shape of the planking.’

X Close Window

Contact Berthon

Top