Tel: +44(0)1590 673312 E-Mail: enquiries@berthon.co.uk

Contact Berthon

  • Our monthly E-News.
  • Occasional details of our upcoming events, products and services.
  • An email version of our annual Lifestyle Publication.

Boat Cleaning – Lift & Scrub

With this seasons warm weather fouling will increase dramatically. Subsequently lowering the performance of your boat and increasing your fuel usage. So why not treat your boat to a scrub this summer! Our Lift & Scrubs are the perfect way to keep your hull in perfect condition.

 

OFFER INCLUDES THE FOLLOWING:
1/3 off the standard price of: Lift & block off ashore / launch / lift, pressure wash & launch.
Collection & return of your yacht from any Lymington River marina berths, pontoons or moorings.
Visual check and report of the hull’s condition.
Offer is only applicable to bookings taken and utilised between 16th July to 31st August.

 

What are the benefits?

  • A clean hull and prop will improve performance through the water.
  • Improved fuel economy.
  • Less crustacean growth around instruments and sensors will create more accurate gauges.
  • Improved engine cooling system efficiency due to less fouling around water intakes.
  • Lifting your boat affords us/you (if present) the opportunity to verify anodes, protrusions and damage.

 

Book a slot today by contacting Simon.

Tel – 01590 673312 Email – simon.barnett@berthon.co.uk

“Many thanks for fitting us in. The mid-season pressure wash has really made a difference to the boat’s performance. In fact, what we’ll save in fuel far outweighs the cost of the lift-n-scrub.”

Jim Coulam, Owner of ‘Miss Naughty’

Visual checklist on lift out

When your yacht is lifted at Berthon Lymington Marina, we can check and report back to you on the following if required:

Antifouling
The general condition

Hull – below waterline
For any signs of osmosis or any other damage

Drives
The external condition in general

Trim tabs
The overall condition and the condition of rams

Rudder(s)
For movement in the bearing, check the blade to stock conditionFor any noticeable damage to the main foil/trailing edge and leading edge

Propeller(s)
The general condition of fixed/feathering/folding blades, check retaining pins, check for any discoloration/pitting

Shaft(s)
The overall condition and check the rope cutter(s)

Saildrive unit
The overall condition and the raw water intake

Bearings
For movement

P bracket
The overall condition and for any signs of movement

Log impeller
For any damage and remove any external fouling

Depth transducer
For any damage

Through hull fittings
The external condition of skin fittingsThe external condition of the raw water intake

Keel
The general condition including keel to hull joint and bulbDamage on trailing and leading edge of foil

Anodes
Visually check the condition of all external anodes including:-HullStern thrusterOutdrives / jetdrivesTrim tabsProp(s)Shaft(s)Sail drive unitBow thruster

Thrusters
The external condition of blades and tunnels for bow and stern thruster systems



EXCLUSION CLAUSE: THIS IS AN ADVISORY NOTICE ONLY, NO PAINT COATINGS HAVE BEEN REMOVED AND NO RESPONSIBILITY WILL BE ACCEPTED FOR ANY NEGLIGENCE OF CHECKS OR REPORT NOR FOR ANY ERRORS, OMISSIONS, OR LATENT DEFECTS OF ANY KIND NOT MENTIONED. THIS IS A COURTESY VISUAL CHECK ONLY AND IS NOT INTENDED TO BE A SUBSTITUTE FOR YOUR USUAL INSPECTION.
DSC_5944

Will a smoother bottom improve performance?

Yes. You will reach your destination faster and more efficiently, whether to a windward buoy or a prime anchorage. A clean hull will also benefit your vessel under power saving fuel and, potentially, improve manoeuvrability.
The graphic below shows the increase in fuel needed to power a boat, versus the roughness of the hull.
increase-in-fuel-required-to-maintain-vessel-speed-versus-increase-in-hull-roughness
The graphic below shows loss of speed, versus the hull roughness.
loss-of-speed-versus-hull-roughness
These graphics show that having a clean hull will have a great effect on your speed and fuel consumption when motoring.
mby-aftermby-before


Frequently asked questionsDSC_5945

Do I need to move the boat myself?
Not if berthed at Berthon in Lymington. However, Berthon’s qualified skippers can deliver boats from/to other marinas for an agreed cost.

Why this summer?
As well as removing any fouling, it offers the chance to inspect the hull below the waterline before that summer cruise, including checking the: keel attachment, propeller, p brackets, anodes, rudder and bow thruster. It also provides the ideal opportunity to touch up any patches in the antifouling. Peace of mind is the outcome, as well as the performance improvement you’ll get from cleaning.

How long does it take?
An hour or two for larger yachts is all it takes for a simple lift, scrub off and launch. Fill out our contact form or call/email Simon Barnett at Berthon directly, stating your preferred date.
DSC_9693
 
 



Offer is not applicable to ashore storage and cradle hire.Removing exceptionally bad fouling or crustacean growth will be charged extra labour at standard rate as used.Offer is only applicable to bookings taken and utilised between 10th July to 31st August. Subject to availability.

Top